Best person to work stocker heads?

Owen S Quirion · 05-26-2010, 07:34 AM

Dave Layer (Heads up) in Dayton is the guy that I would use. He did my heads several years ago and they have worked great. I whacked a few intake valves one day before I had Schubecks in it and he fixed them quickly and reasonably. He is a great guy.

Ron Middleton · 05-27-2010, 08:15 AM

Ok say you've got a set of 416 heads done with the previously required three angle valve job, what can you actually expect to pickup HP and/or flow wise with the new "any valve job" rule now in effect with NHRA? This is a .357"/.370" lift camshaft. These heads are fresh and I really don't want to go back and redo them if it doesn't warrant the power gain. Thanks.

05-26-2010, 07:34 AM	#1
Owen S Quirion Junior Member Join Date: May 2005 Location: Captiol District of New York Posts: 71 Likes: 0 Liked 0 Times in 0 Posts	Re: Best person to work stocker heads? Dave Layer (Heads up) in Dayton is the guy that I would use. He did my heads several years ago and they have worked great. I whacked a few intake valves one day before I had Schubecks in it and he fixed them quickly and reasonably. He is a great guy. __________________ BF/S 1985 Grand Am 3.0 V6

05-27-2010, 08:15 AM	#2
Ron Middleton Member Join Date: Jan 1970 Location: Jackson, Ms. Posts: 350 Likes: 183 Liked 12 Times in 4 Posts	Re: Best person to work stocker heads? Ok say you've got a set of 416 heads done with the previously required three angle valve job, what can you actually expect to pickup HP and/or flow wise with the new "any valve job" rule now in effect with NHRA? This is a .357"/.370" lift camshaft. These heads are fresh and I really don't want to go back and redo them if it doesn't warrant the power gain. Thanks. __________________ #4892 J/SA. We are what we repeatedly do. Excellence then, is not an act, but a habit.” - Aristotle

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode