|
|
06-22-2010, 08:04 AM
|
#5 |
|
Member
Join Date: Nov 2008
Location: calgary alberta canada
Posts: 383
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Pinion angle
The rear suspension in my car is a Dick Miller Racing setup ,solid lower bars with Poly type bushings and adjustable uppers with a heim and a poly bushing. My tranny mount is a polyurethane piece. He recommends negative 1.5 to 2 degrees (down) on the pinion, and says nothing about trans degree's. So if all things being equal I should adjust my tranny to be 1.5 to 2 degrees positive (up) as Alan sugested?
__________________
Dion Hildebrandt 6009 STK H/SA |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode