Block Rust Removal

FED 387 · 10-28-2010, 03:33 PM

ever try soda blasting??? Seems to work with no metal removal---you blast it, wash it off with water then blow dry to remove water and spray Blaster or a marine fogger to protect from rusting--Comp 387

FED 387 · 10-28-2010, 03:49 PM

another product is
called Rust lick----Comp

Tom Goldman · 10-28-2010, 05:06 PM

Jim, You can try getting a bottle of metal prep solution from ypur local body supply house......It's a very dilute acid made for prepping bare metal before bodywork. ...I've used it to clean cylinder walls that had light rust. .........just be sure to neutralize the surfaces with clear water and blow dry before oiling them down

Dgal · 10-28-2010, 05:16 PM

We have used vinegar for rust on guns and tools. Works pretty well, plus it should kill any yeast infection.

Don

Adger Smith · 10-29-2010, 07:48 PM

Try Evapo-Rust... Works good at my shop and I've been told other shops use it.

rallye bob · 10-30-2010, 09:43 AM

Try CLR.....

Joe Schweigert · 10-30-2010, 10:29 AM

CLR works great my need several applications it's available at the Home Depot and Lowes

10-28-2010, 03:33 PM	#1
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,421 Likes: 529 Liked 333 Times in 180 Posts	Re: Block Rust Removal ever try soda blasting??? Seems to work with no metal removal---you blast it, wash it off with water then blow dry to remove water and spray Blaster or a marine fogger to protect from rusting--Comp 387

10-28-2010, 03:49 PM	#2
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,421 Likes: 529 Liked 333 Times in 180 Posts	Re: Block Rust Removal another product is called Rust lick----Comp

10-28-2010, 05:06 PM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 892 Liked 882 Times in 236 Posts	Re: Block Rust Removal Jim, You can try getting a bottle of metal prep solution from ypur local body supply house......It's a very dilute acid made for prepping bare metal before bodywork. ...I've used it to clean cylinder walls that had light rust. .........just be sure to neutralize the surfaces with clear water and blow dry before oiling them down __________________ Tom Goldman 1500 SG , 1506 STK

10-28-2010, 05:16 PM	#4
Dgal Member Join Date: Dec 2009 Posts: 169 Likes: 0 Liked 0 Times in 0 Posts	Re: Block Rust Removal We have used vinegar for rust on guns and tools. Works pretty well, plus it should kill any yeast infection. Don

10-29-2010, 07:48 PM	#5
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Block Rust Removal Try Evapo-Rust... Works good at my shop and I've been told other shops use it. __________________ Adger Smith (Former SS)

10-30-2010, 09:43 AM	#6
rallye bob Member Join Date: Sep 2006 Location: Genoa, Illinois Posts: 489 Likes: 9 Liked 6 Times in 4 Posts	Re: Block Rust Removal Try CLR.....

10-30-2010, 10:29 AM	#7
Joe Schweigert Member Join Date: May 2003 Location: Ontario, calif Posts: 211 Likes: 61 Liked 19 Times in 8 Posts	Re: Block Rust Removal CLR works great my need several applications it's available at the Home Depot and Lowes __________________ Joe Schweigert 751 SS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode