|
|
01-21-2011, 02:27 PM
|
#2 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,123
Likes: 1,580
Liked 1,871 Times in 422 Posts
|
Re: Stocker flat tappet lifters
The most reliable is the tool steel, because, simply put, they don't break, where any ceramic lifter can break, or even shatter. If you're going to run a cast iron core cam, DO NOT use coated lifters. If you're going to run a steel billet cam, then you can run coated lifters. The cam needs to be fully de-burred, and if possible, nitrided.
__________________
Alan Roehrich 212A G/S |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode