Dart blocks for ss?

randy wilson · 01-25-2011, 09:59 AM

I don't know about u guys, but I have yet to see a junk bowtie block, over priced,maybe? Junk, I think not.

63corvette · 01-25-2011, 11:17 AM

Quote:

Originally Posted by randy wilson

I don't know about u guys, but I have yet to see a junk bowtie block, over priced,maybe? Junk, I think not.

When you put them side by side you will be able to tell the difference in quality.
Been there done that... and it was not even close on a choice.
Dart is much superior in almost every way.
When I bought mine the GM block was actually higher in price by just a little, but price was not the deciding factor for me at the time.
My 2 Cents

Alan Roehrich · 01-25-2011, 11:57 AM

Unless they've changed, Dart was using the same foundry and the same material as GM. GM has gone to a very high quality CNC process. They (BowTie blocks) were never junk, but Dart surpassed them in quality at least for a while.

Make sure you compare apples to apples when you compare blocks, don't compare the cheapest two bolt main cast cap BowTie block to a Dart Little M, that's not a reasonable comparison. At one time, GM had a few BowTie blocks that were specifically intended to be cheap and small upgrades from production blocks. They were really meant to pass tech as a factory block in low budget classes so that racers who had to run a GM block could have an alternative to used up worn out salvage yard rejects. They were not meant to be a real "aftermarket" block for high end racing.

Stephen & Horace Johnson · 01-25-2011, 04:42 PM

what block is legal for the SS SBF?

Alan Roehrich · 01-25-2011, 04:55 PM

According to the list, there are none. The only accepted Ford aftermarket blocks on the list (page 89-90) are for the FE.

Stephen & Horace Johnson · 01-25-2011, 06:57 PM

Quote:

Originally Posted by Alan Roehrich

According to the list, there are none. The only accepted Ford aftermarket blocks on the list (page 89-90) are for the FE.

yea i saw that last nite from my droid phone, so i wasnt sure if i was looking at it right, but i thought i heard the Boss block was legal

Darrin Christen · 01-26-2011, 08:20 AM

I might be mistaken, but I think the Dart Little M is heavier than the bowtie when comparing apples to apples.

01-25-2011, 09:59 AM	#1
randy wilson Senior Member Join Date: Jan 2007 Location: N/A Posts: 882 Likes: 0 Liked 22 Times in 22 Posts	Re: Dart blocks for ss? I don't know about u guys, but I have yet to see a junk bowtie block, over priced,maybe? Junk, I think not. __________________ don,t have one

01-25-2011, 11:57 AM	#3
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,137 Likes: 1,617 Liked 1,927 Times in 433 Posts	Re: Dart blocks for ss? Unless they've changed, Dart was using the same foundry and the same material as GM. GM has gone to a very high quality CNC process. They (BowTie blocks) were never junk, but Dart surpassed them in quality at least for a while. Make sure you compare apples to apples when you compare blocks, don't compare the cheapest two bolt main cast cap BowTie block to a Dart Little M, that's not a reasonable comparison. At one time, GM had a few BowTie blocks that were specifically intended to be cheap and small upgrades from production blocks. They were really meant to pass tech as a factory block in low budget classes so that racers who had to run a GM block could have an alternative to used up worn out salvage yard rejects. They were not meant to be a real "aftermarket" block for high end racing. __________________ Alan Roehrich 212A G/S

01-25-2011, 04:42 PM	#4
Stephen & Horace Johnson Senior Member Join Date: Jul 2007 Posts: 966 Likes: 345 Liked 166 Times in 54 Posts	Re: Dart blocks for ss? what block is legal for the SS SBF? __________________ Stephen Johnson #2162 Horace Johnson #2167 SS/D 427 Ford Fairlane NHRA-IHRA

01-25-2011, 04:55 PM	#5
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,137 Likes: 1,617 Liked 1,927 Times in 433 Posts	Re: Dart blocks for ss? According to the list, there are none. The only accepted Ford aftermarket blocks on the list (page 89-90) are for the FE. __________________ Alan Roehrich 212A G/S

01-26-2011, 08:20 AM	#7
Darrin Christen Member Join Date: Mar 2007 Location: Des Allemands, LA Posts: 365 Likes: 8 Liked 1 Time in 1 Post	Re: Dart blocks for ss? I might be mistaken, but I think the Dart Little M is heavier than the bowtie when comparing apples to apples. __________________ 4878 SS/GA 66CHEVY II

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode