|
|
02-08-2011, 03:39 PM
|
#13 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,118
Likes: 1,573
Liked 1,837 Times in 417 Posts
|
Re: stamped steel rocker arm delection
If you can get a bigger pushrod in there, and it is legal to open up the holes in the head, you need to go with a 7/16" x 0.125" wall, at the very least you need a premium brand 3/8" x 0.125" wall 4130 heat treated pushrod. You honestly cannot get too stiff a pushrod in a race engine.
__________________
Alan Roehrich 212A G/S |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode