Holroyd BBC Rocker Arms

Grant Eldridge · 04-22-2011, 01:24 AM

Someone asked, so here's a photo of Clark's rocker. The cross inside identifies the marine 502 rocker, the insert is shown separately to one side....Sorry, I don't have a photo of the special high strength stud and adjuster that are used with the rocker arms. I went to these after noticing that the stock sized ARP studs used with the Crane rockers I had been using were bending as I turned the motor over due to the high spring pressures we were using......
Grant Eldridge

04-22-2011, 01:24 AM	#19
Grant Eldridge Member Join Date: Jul 2007 Posts: 124 Likes: 0 Liked 0 Times in 0 Posts	Re: Holroyd BBC Rocker Arms Someone asked, so here's a photo of Clark's rocker. The cross inside identifies the marine 502 rocker, the insert is shown separately to one side....Sorry, I don't have a photo of the special high strength stud and adjuster that are used with the rocker arms. I went to these after noticing that the stock sized ARP studs used with the Crane rockers I had been using were bending as I turned the motor over due to the high spring pressures we were using...... Grant Eldridge Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode