manifold not sealing

chris ok · 05-01-2011, 04:05 PM

do the intake rockers stud bolt hole in head go thru to intake port? if so use teflon tape and some indian head sealant on the stud threads. just another possible cause.

Alan Roehrich · 05-01-2011, 04:42 PM

Yes, the stud bosses are open to the intake ports.

05-01-2011, 04:05 PM	#1
chris ok Senior Member Join Date: Jul 2002 Location: Long Island, New york Posts: 592 Likes: 131 Liked 46 Times in 29 Posts	Re: manifold not sealing do the intake rockers stud bolt hole in head go thru to intake port? if so use teflon tape and some indian head sealant on the stud threads. just another possible cause.

05-01-2011, 04:42 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,116 Likes: 1,573 Liked 1,830 Times in 415 Posts	Re: manifold not sealing Yes, the stud bosses are open to the intake ports. __________________ Alan Roehrich 212A G/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode