|
|
|
|
08-22-2011, 04:31 PM
|
#1 |
|
Member
Join Date: Dec 2008
Posts: 100
Likes: 0
Liked 1 Time in 1 Post
|
Re: Balancer is "friction welding"
joespanova you have a PM
|
|
|
|
08-22-2011, 05:36 PM
|
#2 |
|
Senior Member
Join Date: Jun 2011
Location: Ga.
Posts: 521
Likes: 7
Liked 13 Times in 11 Posts
|
Re: Balancer is "friction welding"
Alan , and all....thanks for the replies.
I called ATI ( Dave ) in tech and discussed this with him. He was adamant that the balancer was way over due for an over haul for several reasons. One of the reasons is that when new that balancer is only designed for an operating range below 8000 with the o'rings that come in it ( durometer ) . So it will be sent in and set up for what I am doing for as suggested by Alan a very reasonable cost. I did not go into the 2 step with him other than to mention I now use one.......regardless he is very sure its all balancer related. Last edited by joespanova; 08-22-2011 at 05:43 PM. |
|
|
|
|
08-23-2011, 02:32 PM
|
#3 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,116
Likes: 1,573
Liked 1,831 Times in 415 Posts
|
Re: Balancer is "friction welding"
Joe,
Very glad I could help. I've actually seen this a couple of times recently and been through it myself. Glad to pass on what I learned to help others.
__________________
Alan Roehrich 212A G/S |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
