Converting a 68 camaro to a stocker

Alan Roehrich · 09-07-2011, 08:27 PM

Dan Fletcher's stocker was once a Super Stock style car.

You'll have to cut the entire floor pan out where it was modified, and return it to stock, you'll have to remove the ladder bar cross member as well. It's a ton of work.

You might be better off to find another car.

There's only one 350 for a 68 Camaro, the 295 horse version, rated at 290 in Stock. If I were going to run that combination, I'd run it with a 4 speed.

Jeff Lee · 09-07-2011, 08:36 PM

Who's that company...Detroit Speed...sells those Camaro larger than stock but stock appearing wheel houses...

09-07-2011, 08:27 PM	#1
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,123 Likes: 1,580 Liked 1,872 Times in 422 Posts	Re: Converting a 68 camaro to a stocker Dan Fletcher's stocker was once a Super Stock style car. You'll have to cut the entire floor pan out where it was modified, and return it to stock, you'll have to remove the ladder bar cross member as well. It's a ton of work. You might be better off to find another car. There's only one 350 for a 68 Camaro, the 295 horse version, rated at 290 in Stock. If I were going to run that combination, I'd run it with a 4 speed. __________________ Alan Roehrich 212A G/S Last edited by Alan Roehrich; 09-07-2011 at 08:31 PM.

09-07-2011, 08:36 PM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Converting a 68 camaro to a stocker Who's that company...Detroit Speed...sells those Camaro larger than stock but stock appearing wheel houses... __________________ Jeff Lee 7494 D/S '70 AMX

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode