|
|
|
|
09-17-2011, 03:42 PM
|
#1 |
|
Member
Join Date: May 2011
Location: Auburndale,Florida
Posts: 220
Likes: 29
Liked 71 Times in 38 Posts
|
Re: strange axles in ford mustang housing
"O" rings will be enough to seal the housing at both ends.Put a little grease or oil on them so you don't cut the seals as the axles are installed.
|
|
|
|
09-23-2011, 11:59 PM
|
#2 |
|
Member
Join Date: Dec 2009
Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66
Posts: 316
Likes: 0
Liked 20 Times in 15 Posts
|
Re: strange axles in ford mustang housing
make sure the ID of the housing is nice and clean. bearing going in and out have a tendency to gaul up a bit. a small dia. flap wheel on an air grinder will polish up the bore. when nice and clean, the axle will slide out with a good hard pull by hand. use white lube or anti-seeze in the bore.
rod in Az |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
