|
|
|
|
10-25-2011, 04:29 PM
|
#1 |
|
Member
Join Date: Nov 2005
Location: cloquet mn
Posts: 468
Likes: 17
Liked 69 Times in 32 Posts
|
Re: Lifter ? sbc Hydraulic/stocker
You can run a tool steel lifter on a cast cam with proper breakin and lubricant selection, with that being said you can run a tool steel lifter with the proper coating on multiple cams of the
right material/treatment processes with no issues. I have ran tool steel lifters from a few suppliers for over 5 years without a single failure using a few procedures and the cams have been sold and look like new, i have reused one set of lifters on 3 cams and switched back and forth with no issues. If things are done right you can run any oil you want, hope that makes things as clear as possible.
__________________
Ron Mattson 5015 STK |
|
|
|
10-25-2011, 06:13 PM
|
#2 |
|
Senior Member
Join Date: Jan 2002
Location: Michigan City IN
Posts: 633
Likes: 0
Liked 4 Times in 3 Posts
|
Re: Lifter ? sbc Hydraulic/stocker
All PM's replied to.
Thank you. Alex
__________________
Alex Denysenko NHRA 3038 SS, 3305 STK - IHRA 6 SS, 330A STK Moneymaker Racing LaPorte Indiana 219-861-1214 www.moneymakerracing.net |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
