Aluminum or plastic fuel cell ?

69Cobra · 11-02-2011, 10:49 AM

Aluminum here as well.

Bill Belden · 11-02-2011, 12:22 PM

Aluminum

jimmyparker · 11-02-2011, 12:43 PM

I've had alot of problems with the plastic cells leaking around the outlet fittings.

Jimmy Parker

Tom Goldman · 11-02-2011, 01:31 PM

Quote:

Originally Posted by jimmyparker

I've had alot of problems with the plastic cells leaking around the outlet fittings.

Jimmy Parker

You have to watch out for this on aluminum cells also, some do not have the bungs welded in.
Check before you buy, but still buy aluminum.

Bob Bender · 11-02-2011, 04:58 PM

Quote:

Originally Posted by tom goldman

you have to watch out for this on aluminum cells also, some do not have the bungs welded in.
Check before you buy, but still buy aluminum.

x2

Woodro Josey · 11-02-2011, 05:18 PM

I have had Both Kinds and i now have an Aluminum, and i like it best!

stock4174 · 11-15-2011, 06:53 AM

Thanks for info, going with an aluminum cell w/ ground wire.

George Fitzpatrick · 11-15-2011, 08:40 AM

Is there an advantage on aluminum cell vs. the plastic? Just curious

11-02-2011, 10:49 AM	#1
69Cobra Senior Member Join Date: Aug 2007 Location: California, Ky Posts: 669 Likes: 61 Liked 2 Times in 2 Posts	Re: Aluminum or plastic fuel cell ? Aluminum here as well. __________________ Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032

11-02-2011, 12:22 PM	#2
Bill Belden Member Join Date: Jun 2002 Location: York, PA Posts: 241 Likes: 0 Liked 1 Time in 1 Post	Re: Aluminum or plastic fuel cell ? Aluminum __________________ Bill Belden Retired Stock Eliminator [emailSTK1100@comcast.net[/email]

11-02-2011, 12:43 PM	#3
jimmyparker Member Join Date: Oct 2009 Location: columbus, georgia Posts: 385 Likes: 66 Liked 309 Times in 88 Posts	Re: Aluminum or plastic fuel cell ? I've had alot of problems with the plastic cells leaking around the outlet fittings. Jimmy Parker

11-02-2011, 05:18 PM	#6
Woodro Josey Senior Member Join Date: Jul 2007 Posts: 805 Likes: 0 Liked 3 Times in 1 Post	Re: Aluminum or plastic fuel cell ? I have had Both Kinds and i now have an Aluminum, and i like it best! __________________ Woodro Josey 2002 STK

11-15-2011, 06:53 AM	#7
stock4174 Junior Member Join Date: Feb 2008 Location: Memphis,Tn. Posts: 8 Likes: 2 Liked 0 Times in 0 Posts	Re: Aluminum or plastic fuel cell ? Thanks for info, going with an aluminum cell w/ ground wire.

11-15-2011, 08:40 AM	#8
George Fitzpatrick Member Join Date: Oct 2002 Location: West Babylon, NY Posts: 345 Likes: 122 Liked 94 Times in 24 Posts	Re: Aluminum or plastic fuel cell ? Is there an advantage on aluminum cell vs. the plastic? Just curious __________________ George Fitzpatrick 426 HEMI STK, SS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode