Is this legal?

Rob Petrie E395 · 12-07-2011, 07:39 PM

Quote:

Originally Posted by Chris1529

what about the tabs on the axle housing? Are they welded? I don't have one on my car. I am just asking.

If you look down through this thread you will see a picture with a bracket that clamps around the axle tube. I have something similar to them.

cicero819 · 12-08-2011, 05:04 PM

Billy Nees and Mark Yacavonne are right on the money. Rear sway bar is really an anti-roll device in the first place, in other words "it's the same thing. It must be a bolt on. You could use Camaro Z28 or Pontiac Formula sway bars since they came with these cars from the factory. S&W kit just moves the sway bar away fro the rear end and moves it between the upper frame rails(for sure not stock). I would go with the Formulas bigger rear sway bar. Claude

12-08-2011, 05:04 PM	#2
cicero819 VIP Member Join Date: Oct 2008 Location: Aylmer Quebec, Canada Posts: 1,087 Likes: 31 Liked 70 Times in 31 Posts	Re: Is this legal? Billy Nees and Mark Yacavonne are right on the money. Rear sway bar is really an anti-roll device in the first place, in other words "it's the same thing. It must be a bolt on. You could use Camaro Z28 or Pontiac Formula sway bars since they came with these cars from the factory. S&W kit just moves the sway bar away fro the rear end and moves it between the upper frame rails(for sure not stock). I would go with the Formulas bigger rear sway bar. Claude

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode