|
|
02-05-2012, 11:13 PM
|
#8 |
|
Junior Member
Join Date: Aug 2004
Location: Canada
Posts: 45
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Maximum Valve Spring Pressure
You're not going to break studs with that cam/spring combination, and you shouldn't be pulling studs either. If you want a guarantee, drill the stud bosses with a 1/8" bit and install hardened roll pins, or have a shop pull the studs and tap them for repair studs. (shoulderless studs)
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode