|
|
|
|
05-08-2012, 03:21 PM
|
#1 |
|
Senior Member
Join Date: Mar 2006
Posts: 977
Likes: 799
Liked 275 Times in 76 Posts
|
Re: SB Ford CSR water pump O rings
Rory,
Take your housing that has the grove in it, you should be able to match up the diameter and O-ring size at a hardware store. You will probably have to glue the O-ring in the groove to keep from cutting it, when you install it. The original water pump was a reverse rotation due to the serpentine belt rotating the pump backwards, compared to a conventional V-belt drive system. Sean
__________________
Sean Marconette 84 Mustang 5060 SS/N |
|
|
|
05-08-2012, 04:52 PM
|
#2 |
|
Senior Member
Join Date: Jul 2007
Posts: 557
Likes: 6
Liked 13 Times in 3 Posts
|
Re: SB Ford CSR water pump O rings
If you use permatex Ultra Gray to seal it, you won't have any problems. Haven't used O rings with my pumps in years
Chuck |
|
|
|
|
05-08-2012, 08:31 PM
|
#3 |
|
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 569
Likes: 311
Liked 285 Times in 87 Posts
|
Re: SB Ford CSR water pump O rings
Rory..."H"... If you get the pump to me, I can get you the o-rings from a supplier in Richmond. We use them for all our industrial sealing solutions. Maurice ("TFC").
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
