|
![]() |
#4 |
Junior Member
Join Date: Aug 2007
Posts: 54
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
One more thing to check ! Make sure your rotor is centered in the caliper. If it is off center you might have a pad draging one side.
Check this with all pcs. bolted up...[ with out the pads in place]. Mine came with a shim pack [thin washers] to space the caliper housing in or out. PUT LUG NUTS ON THE ROTOR HAT , TO MAKE SURE THATS SNUG IN PLACE ALSO. Hope this is some help !!!! |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|