Ford Racing hard at work...

Jesse Kershaw · 05-15-2012, 03:49 PM

I thought this thread might like to see one of our development engine dyno pulls. This is the 5.0L naturally aspirated engine.

We went over 100hours of dyno time between development and durability on this engine. Then roughly another eighty 1/4 mile runs for each engine combination before we sign off on the finished product.

For added reading if you are interested Evan Smith wrote a nice piece on Cobra Jet track testing in the February 24th, 2012 National Dragstern and 5.0 magazine did a spread on the Cobra Jet engine in new July 2012 issue.

05-15-2012, 03:49 PM	#22
Jesse Kershaw Member Join Date: Apr 2009 Posts: 108 Likes: 6 Liked 122 Times in 11 Posts	Re: Ford Racing hard at work... I thought this thread might like to see one of our development engine dyno pulls. This is the 5.0L naturally aspirated engine. We went over 100hours of dyno time between development and durability on this engine. Then roughly another eighty 1/4 mile runs for each engine combination before we sign off on the finished product. For added reading if you are interested Evan Smith wrote a nice piece on Cobra Jet track testing in the February 24th, 2012 National Dragstern and 5.0 magazine did a spread on the Cobra Jet engine in new July 2012 issue. __________________ Jesse Kershaw

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode