Stocker Cam Lobe Profile ?

Aubrey N Bruneau · 06-03-2012, 01:45 PM

I'm paying attention here... so,
Cams aren't that expensive. I already have a set of good "civilized" headers.
I'll get two cams. One how I "feel" it should be. The other with 10-12 degrees less duration, and run it in the correspondingly somewhat lower RPM range. I have the 4.88's to use in place of my current 5.13's.
For testing purposes, I'll use my current heads.
I'll make that my goal before the end of this season.

Currently, the engine never sees below 4500 RPM on a run.

06-03-2012, 01:45 PM	#22
Aubrey N Bruneau Member Join Date: Sep 2003 Location: South Eastern Alberta, Canada Posts: 311 Likes: 6 Liked 7 Times in 3 Posts	Re: Stocker Cam Lobe Profile ? I'm paying attention here... so, Cams aren't that expensive. I already have a set of good "civilized" headers. I'll get two cams. One how I "feel" it should be. The other with 10-12 degrees less duration, and run it in the correspondingly somewhat lower RPM range. I have the 4.88's to use in place of my current 5.13's. For testing purposes, I'll use my current heads. I'll make that my goal before the end of this season. Currently, the engine never sees below 4500 RPM on a run. __________________ Aubrey N Bruneau 6409 C/S 62 BelAir sport coupe, 409 HP 409

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode