Stocker Cam Lobe Profile ?

Phillip marvetz · 06-04-2012, 03:11 PM

Aubrey,
I had a similar issue with the Hemi at first. Lots of valve float at 6200rpm, I called the guy that the short block, heads and cam came from ( I bought them separately as funds came together ) and he told me I needed more spring pressure. Long story short I think I could have put springs for a roller cam in it and it still would not have done any good.
I finally called Tim Cole and gave him the card number for the cam, He actually laughed and asked who in the hell had sold me that cam then stopped when he saw the fellows name on the order sheet. He asked me if I wanted a cam that would work and I told that I would indeed like that.

It goes thru the traps at 8000rpm now. Thanks Tim!

06-04-2012, 03:11 PM	#33
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Stocker Cam Lobe Profile ? Aubrey, I had a similar issue with the Hemi at first. Lots of valve float at 6200rpm, I called the guy that the short block, heads and cam came from ( I bought them separately as funds came together ) and he told me I needed more spring pressure. Long story short I think I could have put springs for a roller cam in it and it still would not have done any good. I finally called Tim Cole and gave him the card number for the cam, He actually laughed and asked who in the hell had sold me that cam then stopped when he saw the fellows name on the order sheet. He asked me if I wanted a cam that would work and I told that I would indeed like that. It goes thru the traps at 8000rpm now. Thanks Tim! __________________ 2009 V/SA Record Holder

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode