Who still grinds Stock Eliminator Camshafts?

Jim Wahl · 07-09-2012, 10:59 AM

Quote:

Originally Posted by Chris Hardy

It appears that the available choices are slim. Thanks everyone.

I remember back in the day Chet Herbert would make any cam you wanted for no extra cost! Lunati used to be "The Cam" maker. I used Cam Dynamics and General Kinetics in the SS way back when. Jim

.

FrankChastain · 07-09-2012, 11:12 AM

Jim or anyone that might know what ever happen to Mark Heffington (mp) that owned Cam Dynamics? One time I heard he went to Crane, I think...

Quote:

Originally Posted by Jim Wahl

I remember back in the day Chet Herbert would make any cam you wanted for no extra cost! Lunati used to be "The Cam" maker. I used Cam Dynamics and General Kinetics in the SS way back when. Jim

.

BlueOval Ralph · 07-09-2012, 11:25 AM

He owns Hyper Tech the company Amy Faulk runs

FrankChastain · 07-09-2012, 11:44 AM

Quote:

Originally Posted by BlueOval Ralph

He owns Hyper Tech the company Amy Faulk runs

Thanks....

Aubrey N Bruneau · 07-09-2012, 01:15 PM

Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman.

Alan Roehrich · 07-09-2012, 07:10 PM

Only Billy Godbold at Comp Cams and Don Walthall at Bullet have actually done any recent design work on Stock Eliminator cams that I know of. I don't know that Crane or Lunati have any Stock Eliminator designs that are not quite a few years old.

There are some other people, both known and "unknown", doing some design work, including the designer at LSM, and a few others, mostly people who own their own company and their own design software.

The problem is that Stock Eliminator is a very small and well defined market, you're not going to see too many companies willing to invest in that market.

Alex Denysenko · 07-11-2012, 09:10 PM

Quote:

Originally Posted by Aubrey N Bruneau

Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman.

ChaseKnight hasbeen with Crane almost as long as stock has been around. he knows his way around a s/ss grind or 2

Knight hasbeen with crane almost as long as stock has been around. he knows his way around a s/ss grind or 2

07-09-2012, 11:25 AM	#3
BlueOval Ralph Banned Join Date: Feb 2008 Posts: 852 Likes: 0 Liked 0 Times in 0 Posts	Re: Who still grinds Stock Eliminator Camshafts? He owns Hyper Tech the company Amy Faulk runs

07-09-2012, 01:15 PM	#5
Aubrey N Bruneau Member Join Date: Sep 2003 Location: South Eastern Alberta, Canada Posts: 311 Likes: 6 Liked 7 Times in 3 Posts	Re: Who still grinds Stock Eliminator Camshafts? Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman. __________________ Aubrey N Bruneau 6409 C/S 62 BelAir sport coupe, 409 HP 409

07-09-2012, 07:10 PM	#6
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,116 Likes: 1,573 Liked 1,831 Times in 415 Posts	Re: Who still grinds Stock Eliminator Camshafts? Only Billy Godbold at Comp Cams and Don Walthall at Bullet have actually done any recent design work on Stock Eliminator cams that I know of. I don't know that Crane or Lunati have any Stock Eliminator designs that are not quite a few years old. There are some other people, both known and "unknown", doing some design work, including the designer at LSM, and a few others, mostly people who own their own company and their own design software. The problem is that Stock Eliminator is a very small and well defined market, you're not going to see too many companies willing to invest in that market. __________________ Alan Roehrich 212A G/S Last edited by Alan Roehrich; 07-10-2012 at 01:57 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode