Copo # 3

FrankChastain · 08-04-2012, 05:28 AM

Make sure you carry the camera and take a bunch of pictures for us folks...

Quote:

Originally Posted by cambria

Just notified I pick up my car wednesday

cambria · 08-04-2012, 07:23 AM

No doubt noon wed we take delivery

Superfan1 · 08-04-2012, 12:14 PM

Are you going to enter Indy with the car?

cambria · 08-04-2012, 01:37 PM

Depends how it runs

Geerhead55 · 08-04-2012, 02:11 PM

Quote:

Originally Posted by Superfan1

Are you going to enter Indy with the car?

Why wait so long?? Brainerd is next up!
Danny Durham

cambria · 08-04-2012, 02:23 PM

No one know what these cars will actually do and the CJ'S are not running stock off the showroom floor. They have 3 years of r and D and guys like Bo laying the green to them to make them fast need to pick a motor builder other than Patterson who is working the CJ'S need a Chevy big blower guy and am open for suggestions. My goal is to make this the fastest COPO 4.0 If all the CJ'S were running as delivered it would be a different story

Monte Howard · 08-04-2012, 03:03 PM

Paul, I would contact BES racing engines in Indiana.
They have made some fast guys even faster.
Parsons and Myers would also be a good pick.
I would also look into some of the premier comp eliminator engine builders.

Doug McCue · 08-04-2012, 03:08 PM

you have a pm

D.Johns · 08-04-2012, 04:14 PM

Quote:

Originally Posted by Monte Howard

Paul, I would contact BES racing engines in Indiana.
They have made some fast guys even faster.
Parsons and Myers would also be a good pick.
I would also look into some of the premier comp eliminator engine builders.

BES will be building my CJ engine. Like stated he's made fast guys faster. In the NMRA he was able to make more power with less failures to boot. The last part is the most important! Unless you've got an endless money supply(which I don't).

08-04-2012, 07:23 AM	#2
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 No doubt noon wed we take delivery __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0

08-04-2012, 12:14 PM	#3
Superfan1 VIP Member Join Date: Dec 2007 Location: Bridgeport,CT. Posts: 1,993 Likes: 1,664 Liked 2,637 Times in 440 Posts	Re: Copo # 3 Are you going to enter Indy with the car? __________________ Bill Seabrooks - superfan1 Bridgeport, CT

08-04-2012, 01:37 PM	#4
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 Depends how it runs __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0

08-04-2012, 02:23 PM	#6
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 No one know what these cars will actually do and the CJ'S are not running stock off the showroom floor. They have 3 years of r and D and guys like Bo laying the green to them to make them fast need to pick a motor builder other than Patterson who is working the CJ'S need a Chevy big blower guy and am open for suggestions. My goal is to make this the fastest COPO 4.0 If all the CJ'S were running as delivered it would be a different story __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0 Last edited by cambria; 08-04-2012 at 02:25 PM.

08-04-2012, 03:03 PM	#7
Monte Howard Member Join Date: Nov 2002 Location: Potomac,IL Posts: 279 Likes: 1 Liked 71 Times in 23 Posts	Re: Copo # 3 Paul, I would contact BES racing engines in Indiana. They have made some fast guys even faster. Parsons and Myers would also be a good pick. I would also look into some of the premier comp eliminator engine builders. __________________ Monte Howard 3209 STK, 3208 SS

08-04-2012, 03:08 PM	#8
Doug McCue Member Join Date: Jun 2007 Posts: 232 Likes: 7 Liked 13 Times in 2 Posts	Re: Copo # 3 you have a pm

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode