327 head gaskets?

Alan Roehrich · 08-18-2012, 10:36 PM

There is no single steel or stainless shim gasket I'm aware of.

Cometic has an MLS gasket that will be in that range, you can pick your bore size, and you can use them 3-5 times if you're careful. They pay for themselves that way.

james schaechter · 08-19-2012, 07:18 AM

We use cometic head gaskets all the time. They make nice stuff. As Alan said, they can be reused several times. I just tried out their mls header gaskets recently, and they are awesome! Tell them the thickness, bore size and engine.

08-18-2012, 10:36 PM	#1
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,125 Likes: 1,583 Liked 1,880 Times in 422 Posts	Re: 327 head gaskets? There is no single steel or stainless shim gasket I'm aware of. Cometic has an MLS gasket that will be in that range, you can pick your bore size, and you can use them 3-5 times if you're careful. They pay for themselves that way. __________________ Alan Roehrich 212A G/S

08-19-2012, 07:18 AM	#2
james schaechter VIP Member Join Date: Dec 2004 Location: Cumming GA Posts: 1,994 Likes: 1,296 Liked 1,439 Times in 301 Posts	Re: 327 head gaskets? We use cometic head gaskets all the time. They make nice stuff. As Alan said, they can be reused several times. I just tried out their mls header gaskets recently, and they are awesome! Tell them the thickness, bore size and engine. __________________ James Schaechter 3163 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode