|
|
|
|
08-29-2012, 10:41 PM
|
#1 |
|
Senior Member
Join Date: Aug 2007
Location: California, Ky
Posts: 669
Likes: 61
Liked 2 Times in 2 Posts
|
Re: My 283 Build
Looks like the guide shows 54.9 cc's for the combustion chamber if I'm looking at it right.
http://www.nhraracer.com/content/gen...634&zoneid=132
__________________
Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032 |
|
|
|
08-30-2012, 12:54 PM
|
#2 |
|
Member
Join Date: Aug 2011
Location: Demossville,KY
Posts: 337
Likes: 0
Liked 0 Times in 0 Posts
|
Re: My 283 Build
lifters is the next thing on the list. Whats availble?Is there any way to check mine to see if they are hurt? I know the cam co. has lifters? is there advantage to shubecs or what ever they are ?
|
|
|
|
|
08-30-2012, 02:00 PM
|
#3 |
|
VIP Member
Join Date: Oct 2008
Location: Somerset,Ky
Posts: 1,372
Likes: 354
Liked 307 Times in 103 Posts
|
Re: My 283 Build
shubeck now smith lifters have diamond hard bottoms (some kind ceramic)on them can run more spring pressure don't have to break-in and can be used on another cam they are somewhere around 750.00 Precision perf. products in NC. have tool steel made for NHRA are around 475.00 can use about 425lbs max spring pressure.
You can check lifters with straight edge hold up to light should see lifter crowned in center if check with dial indicator center needs at least .001 crown in center If you had bearing trouble cam and lifters could have material embedded and will eat lobes up fast can send in and have refinished and redo the parkerize(the black finish on lobes) Also Smith's and PPPC lifters have extra travel removed plungers just move .015 mininium allowed Mike Taylor3601 |
|
|
|
|
09-21-2012, 08:14 PM
|
#4 |
|
Member
Join Date: Aug 2011
Location: Demossville,KY
Posts: 337
Likes: 0
Liked 0 Times in 0 Posts
|
Re: My 283 Build
Well I finally finished the 283 up. I got one run today at national trail. 12.23 at 107. I want to thank everyone involved in getting me back together. You know who you are.
|
|
|
|
|
09-22-2012, 06:23 AM
|
#5 |
|
Senior Member
Join Date: Aug 2007
Location: California, Ky
Posts: 669
Likes: 61
Liked 2 Times in 2 Posts
|
Re: My 283 Build
Looks like you've picked up a few tenth since BG. NICE!!!!
Happy Birthday today Phil and I hope you bring home the win in C-Bus.
__________________
Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032 |
|
|
|
|
09-22-2012, 01:19 PM
|
#6 |
|
Veteran Member
Join Date: Jan 2002
Location: Central Florida
Posts: 5,844
Likes: 667
Liked 683 Times in 129 Posts
  |
Re: My 283 Build
Good for you Phil! Glad to see you are back together and doing well! Jim
.
__________________
Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. 
|
|
|
|
|
09-22-2012, 03:01 PM
|
#7 |
|
Member
Join Date: Jul 2009
Location: Bulington, Ky
Posts: 359
Likes: 0
Liked 6 Times in 5 Posts
|
Re: My 283 Build
PhilBob!! Take that motor to Tony and be DONE WITH IT!!!
What would WADE TELL YOU???
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
