Just a point of interest to

[Greg Hill]

Originally Posted by Tom Goldman

For those of you who don't know, I've worked for a former AMC dealer for over 37 years , and have worked on the owners,and my own AMX'S since '72 ,so I have a little knowledge about AMC's.
I still have all the factory parts books from '66 thru '76, including the group19 sections, which were only 4 pages....ALL group 19 parts were over the counter, dealer,or owner installed only.
The Edelbrock R4B intake is listed p/n 4488409 and had factory part numbers cast on them for both '69-'69&'70&up engines.
The group19 cam to my knowlege, and I installed quite a few of them, had .477" lift.
The group19 Holley carb,p/n 4885730 was actually a Holley 950cfm 3 bbl,list 3916.
Just imagine if that carb was approved instead of the 780 !
Also available were 4bolt main blocks, and even a 8 quart oil pan P/N 4485741.
While I'd love to see what can be done with these new parts, and I'm really glad to see the 4300 Motorcraft carb superceeded, only the surface was scratched with regards to potential without these parts.

Tom, so I guess I should ask for all the trans am parts that were in the Chevy parts book in 1970 and 1971. It seems to me that I remember something in the rule book saying that special dealer only installed parts were not legal. I know that in 1969 the cross ram manifold with 2 holleys and the off road cam was available on the Z28 from the factory in the trunk and yet that has never been legal. Where does all this bs come from?

[Tom Goldman]

I don't know Greg.
The carb replacement on the '70 is good since the Ford's have had it for a replacement for the 4300 for years.... the rest is someone playing the AMC version of Caroll Shelby.
The '68-'69 T/A Javelins also ran the crossram with 2 Holley 600's so I don't know where the Holley 780 comes from on the '68-'69 cars, especially since the hp rating was pretty close with the AFB carb.

[gmonde]

since we are the subject of amc's ,i just made a few passes in my new ride with the car being new from the engine block back www.gmondeperformance.com under D/S amx
with some video posted it was worth the wait gmonde

[Geerhead55]

Nice videos,, Garrett. The motor sounds great,, launches well,,, good luck and have fun getting it sorted out. Its a great looking car, and I like how you did your gauges and saved the original dash,,, take care.
Danny Durham

[Jack McCarthy]

greg same as an individual asking for a combo to be put into the books (with an obviuos HP error) after 25 years and it being granted with little documentation...and look how it effected the class / eliminator qaulifying sheet / ladder sheet and #1 qualifier money....

seriously i just wonder what you could get apporved with a few letters... hell i know a 2.5 second under truck

time to find somewhere else to race this is insanity.
captain jack

[Mark Yacavone]

Jack ,That's probably not a dime rocket you have any more, but it sure ran good..You ought to be proud...We know it out here.

[skills]

I have a question, I am not a racer just a fan. Is Nhra adding parts making it cheaper or just making things more complicated?

[Ed Fernandez]

Originally Posted by Greg Hill

Tom, so I guess I should ask for all the trans am parts that were in the Chevy parts book in 1970 and 1971. It seems to me that I remember something in the rule book saying that special dealer only installed parts were not legal. I know that in 1969 the cross ram manifold with 2 holleys and the off road cam was available on the Z28 from the factory in the trunk and yet that has never been legal. Where does all this bs come from?

Yeah geez Greg.Poor old Chevrolet is getting a real screwing.They've never gotten bone tossed out to them over the years by those mean old NHRA baboons.Call in the lawyers.

[Jack Matyas]

Originally Posted by Greg Hill

Tom, so I guess I should ask for all the trans am parts that were in the Chevy parts book in 1970 and 1971. It seems to me that I remember something in the rule book saying that special dealer only installed parts were not legal. I know that in 1969 the cross ram manifold with 2 holleys and the off road cam was available on the Z28 from the factory in the trunk and yet that has never been legal. Where does all this bs come from?

Just think Greg -- that CrossRam is going to look great under your hood ...........You might need the Optional Hood for proper clearance .And that Off Road cam is going to need Roller Rockers to perform well .............And you're right -- its all BS .

[Larry Hill]

Do they get a 2.2 crank pin instead of a 2.438, Dove heads, 527 lift cam, 780 carb instead of a 735, and Edelbrock heads. That was 15 years ago. What happened to the loud voices then, its still wrong and a bunch of BS.