Mustang Front End

Freddie · 07-09-2007, 03:45 PM

we actually did that with a set of well prepped DOOE heads, that were fitted with 1.94/1.55 valves.. I think if I were to do it again I would try the N352's

Grosspeed · 10-14-2007, 10:14 PM

I was thinking about doing this (SS/CS) at one time as well. N351 have larger ports, Vic Jr. intake and small solid roller. Good luck hope you have a full cage.

07-09-2007, 03:45 PM	#1
Freddie Member Join Date: Jul 2005 Location: Tampa Fla / Anderson SC Posts: 334 Likes: 12 Liked 3 Times in 2 Posts	Re: Mustang Front End we actually did that with a set of well prepped DOOE heads, that were fitted with 1.94/1.55 valves.. I think if I were to do it again I would try the N352's

10-14-2007, 10:14 PM	#2
Grosspeed Junior Member Join Date: Mar 2004 Location: Maryland Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Re: Mustang Front End I was thinking about doing this (SS/CS) at one time as well. N351 have larger ports, Vic Jr. intake and small solid roller. Good luck hope you have a full cage. __________________ RAM Racing Purnell Auto Body AMI S10

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode