Help me Read

drgrcr1156 · 10-22-2012, 12:16 PM

It might be helpful to see the driveshaft rpm graph with the engine rpm gragh.

Bob

Ron Gusack · 10-22-2012, 12:35 PM

Quote:

Originally Posted by drgrcr1156

It might be helpful to see the driveshaft rpm graph with the engine rpm gragh.

Bob

I'm in the process of machining the yoke so I can read DS rpm, but I don't have it for this graph.

Chris Hill · 10-22-2012, 05:49 PM

Yep, flashing at 4,700.

During the 0.4 sec, the output of the converter is "catching up" witht the input of the converter. Once you have driveshaft rpm as well, it will be more clear.

I know the ramp from staging to flash is very slow compared to a car that two-steps.

And it's neat to see AFR going down the track. I think that may be more valueable than flash point and etc.

10-22-2012, 12:16 PM	#1
drgrcr1156 Junior Member Join Date: May 2010 Location: Massachusets Posts: 91 Likes: 0 Liked 2 Times in 1 Post	Re: Help me Read It might be helpful to see the driveshaft rpm graph with the engine rpm gragh. Bob

10-22-2012, 05:49 PM	#3
Chris Hill Senior Member Join Date: Jan 2002 Posts: 655 Likes: 8 Liked 244 Times in 26 Posts	Re: Help me Read Yep, flashing at 4,700. During the 0.4 sec, the output of the converter is "catching up" witht the input of the converter. Once you have driveshaft rpm as well, it will be more clear. I know the ramp from staging to flash is very slow compared to a car that two-steps. And it's neat to see AFR going down the track. I think that may be more valueable than flash point and etc. __________________ Chris Hill https://ihmusedparts.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode