|
|
12-05-2012, 09:07 PM
|
#2 |
|
Member
Join Date: Aug 2010
Location: CT
Posts: 462
Likes: 1,827
Liked 348 Times in 152 Posts
|
Re: Plug to piston clearance?
I would think (depending on RPM, bearing clearance, etc.) .035 -.040 should be plenty. At .030 I have seen a bit of contact at higher RPM (7200-7400)
__________________
Phil Molski PMR Performance S/C 1623 |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode