Need Tech Help Again: 94 F350 Cold Start, Trans

Tony396 · 08-02-2007, 08:58 PM

Thanks for all the info, guys.

Going to change the temp sensor first thing tomorrow.

Dumb question here...

Isn't cooler temp tied into converter lock up? Therefore..if the sensor is bad, couldn't it cause the converter not to lock up?

Tony

Alan Roehrich · 08-03-2007, 09:12 PM

Usually, the converter won't lock up if the coolant temp is too low, at least early in the run cycle.

08-02-2007, 08:58 PM	#1
Tony396 Junior Member Join Date: Jun 2003 Location: North Hanover NJ 08562 Posts: 19 Likes: 0 Liked 0 Times in 0 Posts	Re: Need Tech Help Again: 94 F350 Cold Start, Trans Thanks for all the info, guys. Going to change the temp sensor first thing tomorrow. Dumb question here... Isn't cooler temp tied into converter lock up? Therefore..if the sensor is bad, couldn't it cause the converter not to lock up? Tony

08-03-2007, 09:12 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,121 Likes: 1,579 Liked 1,856 Times in 420 Posts	Re: Need Tech Help Again: 94 F350 Cold Start, Trans Usually, the converter won't lock up if the coolant temp is too low, at least early in the run cycle. __________________ Alan Roehrich 212A G/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode