|
|
|
|
04-25-2013, 03:55 PM
|
#1 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,423
Likes: 542
Liked 333 Times in 180 Posts
|
Re: Fuel Spigot for Fuel Check
you will need a "flare seal" ORB fitting(EARLS/XRP/AEROQUIP SELLS EM) with a -10 size on the one end or whatever size the regulator is and a NPT either male or female on the other end--- otherwise just get a AN ORB plug and drill & tap it for the proper size NPT thread
|
|
|
|
04-25-2013, 07:28 PM
|
#2 |
|
VIP Member
Join Date: Oct 2008
Location: Somerset,Ky
Posts: 1,374
Likes: 359
Liked 308 Times in 103 Posts
|
Re: Fuel Spigot for Fuel Check
Have LSM fuel check valve, has push button
Mike Taylor 3601 |
|
|
|
|
04-26-2013, 01:20 PM
|
#3 |
|
Senior Member
Join Date: Dec 2001
Location: Papillion, NE
Posts: 611
Likes: 244
Liked 293 Times in 65 Posts
|
Re: Fuel Spigot for Fuel Check
Not sure which A1000 you have, but if there's an 1/8"NPT gauge port on it, you can use the Aeromotive 15631 sample valve. I bought one and used it with my Magnafuel regulator...nice piece, plus it has another port for the gauge.
|
|
|
|
|
04-26-2013, 09:35 PM
|
#4 |
|
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 569
Likes: 311
Liked 285 Times in 87 Posts
|
Re: Fuel Spigot for Fuel Check
I ordered one from Jerry Bickel. There were several to choose from, they offer NPT as well as AN style. The price was on the level with the rest. MB
|
|
|
|
|
04-27-2013, 07:36 PM
|
#5 |
|
Member
Join Date: Dec 2006
Location: Cocoa Florida
Posts: 205
Likes: 181
Liked 72 Times in 36 Posts
|
Re: Fuel Spigot for Fuel Check
I would buy a -6 straight thread plug from Jegs with a o-ring . Then drill and tap the plug for a 1/4 pipe thread. That is what I did. I think the price was $ 3.99 I hope this helps. Kenney Kelley
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
