Nitrided Comp cam

Adger Smith · 05-05-2013, 11:47 AM

After having some failures on FT cams used in limited C Track engines I switched to the Comp Nitrided cams. Now I don't sell any thing but them. Finally started getting some of the small diameter springs with good rates to handle the RPM. Then the cams are too soft and fail. Seems like you are always chasing you tail in this business. Do it and don't look back. Look forward to the next thing that will fail, like fuel pump pushrods.....

05-05-2013, 11:47 AM	#3
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Nitrided Comp cam After having some failures on FT cams used in limited C Track engines I switched to the Comp Nitrided cams. Now I don't sell any thing but them. Finally started getting some of the small diameter springs with good rates to handle the RPM. Then the cams are too soft and fail. Seems like you are always chasing you tail in this business. Do it and don't look back. Look forward to the next thing that will fail, like fuel pump pushrods..... __________________ Adger Smith (Former SS)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode