Strange Engineering Master Cylinder

[brent flynn]

Thanks Richard! I will have to wait a year or two, before i can switch brake systems... If i can get it to run some sort of #, then, i will start on that kind of stuff... would love to have discs, on the front , atleast. Eventually, discs, all the way around, would be the ticket. My goal, is to make this the best car it can be, not necessarily the fastest...because , the latter costs alot more! hehe

[Run to Rund]

For my 1966 A body with drums, I use Centric 130.62024 from andreotti@ottsfrictionsupply.com and I believe it is spec'ed to have a 1" bore. They also have Abex quality shoes that hold well and don't glaze stopping from 118 mph.

[Jim Kaekel]

Don't waste your money on disc brakes at this point. Drum brakes work good and are treated like Rodney Dangerfield, "no respect". I pull my drums off every few races, clean and inspect them. Use premium, riveted shoes and good drums. I've run them for years on all fours with very little issues. I've found that car weight makes quite a difference. When I ran my car in E/SA or F/SA, I could smell that the brakes were hot, but that was roughly 3800 lbs. @ 120 MPH. Since I switched to D/SA and I'm weighing in at 3540 lbs., I don't smell them getting hot at all, even after braking from as high as 124 MPH. I wouldn't even think about using aluminum drums unless you enjoy playing Russian roulette. My .02.

[brent flynn]

Originally Posted by Jim Kaekel

Don't waste your money on disc brakes at this point. Drum brakes work good and are treated like Rodney Dangerfield, "no respect". I pull my drums off every few races, clean and inspect them. Use premium, riveted shoes and good drums. I've run them for years on all fours with very little issues. I've found that car weight makes quite a difference. When I ran my car in E/SA or F/SA, I could smell that the brakes were hot, but that was roughly 3800 lbs. @ 120 MPH. Since I switched to D/SA and I'm weighing in at 3540 lbs., I don't smell them getting hot at all, even after braking from as high as 124 MPH. I wouldn't even think about using aluminum drums unless you enjoy playing Russian roulette. My .02.

Yea, i dont have any problem stopping, from 120, at this point. Everything is new. We ran 130, in my Dad's Bird(3000lb bracket car) with drum/drum, and had no probs, whatsoever... I will get a different master cyl(this one was never right, its about 1 1/2 yrs old), and go from there... then a new line lock, if that doesnt pan out...