Great job Mark Kirby

B Aceves · 10-28-2013, 05:26 PM

Great Job Mark !! and PMR race cars

sst7250 · 10-28-2013, 05:40 PM

Mark congrats on the R/U!!

GrapeApe7575 · 10-28-2013, 05:52 PM

You know, I really can't say enough about the support groups that make us winners(or runners up). PMR Race Cars not only built a state of the art car for myself and 3 of the 4 semi finalists in S/SS, but they were there before and after every round checking the cars, fixing little stuff, and even providing driving and strategy hints to their customers. In my opinion, they go way out of the way to see to the success of their customers....and in many cases to those who are not necessarily paying customers. As engine builders, guys like Brad Van Lant and Bob Lambeck go to great lengths to make sure you have the best parts and information after the sale to keep you moving forward. Not enough can be said about these kinds of suppliers and the help they provide. If you measure the dollars spent vs the time they spend with you after the project is complete they are working for about $ .25hr. Not bad.....but would you do it?

10-28-2013, 05:26 PM	#1
B Aceves Member Join Date: Nov 2008 Posts: 457 Likes: 1 Liked 7 Times in 4 Posts	Re: Great job Mark Kirby Great Job Mark !! and PMR race cars __________________ Bob Aceves, 746 E/SA A&M motorsports

10-28-2013, 05:40 PM	#2
sst7250 Member Join Date: Jan 2009 Location: Las Vegas, NV Posts: 184 Likes: 9 Liked 45 Times in 32 Posts	Re: Great job Mark Kirby Mark congrats on the R/U!!

10-28-2013, 05:52 PM	#3
GrapeApe7575 Member Join Date: Apr 2009 Posts: 194 Likes: 20 Liked 341 Times in 77 Posts	Re: Great job Mark Kirby You know, I really can't say enough about the support groups that make us winners(or runners up). PMR Race Cars not only built a state of the art car for myself and 3 of the 4 semi finalists in S/SS, but they were there before and after every round checking the cars, fixing little stuff, and even providing driving and strategy hints to their customers. In my opinion, they go way out of the way to see to the success of their customers....and in many cases to those who are not necessarily paying customers. As engine builders, guys like Brad Van Lant and Bob Lambeck go to great lengths to make sure you have the best parts and information after the sale to keep you moving forward. Not enough can be said about these kinds of suppliers and the help they provide. If you measure the dollars spent vs the time they spend with you after the project is complete they are working for about $ .25hr. Not bad.....but would you do it?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode