.031 dykes - Page 2

Ed McLawhorn Jr. · 11-08-2013, 10:13 PM

Quote:

Originally Posted by DBi Racing

Call Don Lent at MAHLE (the former Sealed Power). If he can't find what your looking for I know he can find a ring set that you will like.

Work: 231-724-1897

Bill Lent (Yes, his son!)
O/SA 3158

Thanks Bill, May give him a call....

Ed

Jody Lang · 11-09-2013, 02:55 AM

Try Gregg Luneak at Tri City Competition

Lee Valentine · 11-09-2013, 07:42 AM

Just got two sets from perfect circle through Liberty engine parts. Still in their race rings catalog.

JRyan · 11-09-2013, 02:50 PM

Ed Jr.,

Don't worry about the .031 Dykes ring being a a worthy piece for your 283. Ours Olds would still run in the 10's at 120 mph (on kill) in SS/NA after 275 runs on the Dykes rings.

Oh! They were a special set made by Gregg Luneak and were 5/64 " rings rather than the common 1/16 " rings because nobody makes a 3.865 Moly 1/16" ring anymore. All that was available at the time were the 5/64" rings. They weren't supposed to work, but obviously they do.

Jerry

11-09-2013, 02:55 AM	#2
Jody Lang Member Join Date: Mar 2002 Posts: 306 Likes: 28 Liked 89 Times in 28 Posts	Re: .031 dykes Try Gregg Luneak at Tri City Competition

11-09-2013, 07:42 AM	#3
Lee Valentine Senior Member Join Date: May 2004 Location: Brookfield, CT Posts: 708 Likes: 13 Liked 319 Times in 68 Posts	Re: .031 dykes Just got two sets from perfect circle through Liberty engine parts. Still in their race rings catalog. __________________ Lee Valentine 1661 STK

11-09-2013, 02:50 PM	#4
JRyan Senior Member Join Date: Apr 2003 Location: Aberdeen SD Posts: 645 Likes: 30 Liked 112 Times in 31 Posts	Re: .031 dykes Ed Jr., Don't worry about the .031 Dykes ring being a a worthy piece for your 283. Ours Olds would still run in the 10's at 120 mph (on kill) in SS/NA after 275 runs on the Dykes rings. Oh! They were a special set made by Gregg Luneak and were 5/64 " rings rather than the common 1/16 " rings because nobody makes a 3.865 Moly 1/16" ring anymore. All that was available at the time were the 5/64" rings. They weren't supposed to work, but obviously they do. Jerry

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode