|
|
![]() |
#1 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
![]()
Thanks Alan.
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2007
Location: California, Ky
Posts: 669
Likes: 61
Liked 2 Times in 2 Posts
|
![]()
Question. If you put seals or baffles in the tubes to keep the lube at the gear do you need to worry about axle bearings?
__________________
Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032 |
![]() |
![]() |
![]() |
#3 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
![]()
If your axle bearings are sealed, I wouldn't know why.
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Aug 2007
Location: California, Ky
Posts: 669
Likes: 61
Liked 2 Times in 2 Posts
|
![]() ![]()
__________________
Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032 |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Feb 2004
Location: Saint John NB Canada
Posts: 561
Likes: 30
Liked 6 Times in 5 Posts
|
![]()
Quite a few years ago, I read an article in a MuscleCar magazine in which they did a back to back comparison of regular and synthetic lubes in a '69 Hemi Charger with an A-833 4-speed and a Dana 60. IIRC the total difference between dinosaur oils and synthetics in engine/trans and axle was 3 tenths. Car went from 13.00 to 12.70 doing nothing but changing to synthetic lubes.
|
![]() |
![]() |
![]() |
#6 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
![]()
My p.o.s. didn't show anything when I switched.
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Dec 2010
Location: ledbetter ky.
Posts: 42
Likes: 5
Liked 6 Times in 2 Posts
|
![]()
Alan I had this conversation with mr. B about the gl6 lube but I have not been able to locate any , is it available in the Nashville area? Thanks .
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|