Is this allowed NHRA Stock????

[jim powers]

i believe that if the car is still in 100% street legal form, as in catalitic converters still being used, where you have to use unleaded fuel, i do not think any unleaded fuel will pass fuel check, not sure if you have to pass tech or actually make a legitimate qualifying run to earn any points, Dave Ley a little help here thanks

[Mark Yacavone]

This depends on what division and who's the director at the time.
Some you have to qualify and get on the ladder..
Some you just pay the tab.
You'd think it would be a uniform procedure, but it may still not be..
First hand experience...

[Mike Carr]

Originally Posted by Mark Yacavone

This depends on what division and who's the director at the time.
Some you have to qualify and get on the ladder..
Some you just pay the tab.
You'd think it would be a uniform procedure, but it may still not be..
First hand experience...

Yes, it depends who you are and where you are. In 2000, I tried to get a rental car to get a grade point. Was told "the car must make a run, pass fuel check and get on the sheet. No street cars allowed". Later that SAME year, another person did it at least TWO, maybe THREE times, with a street vehicle, and was permitted to do so--in the SAME DIVISION as me. Three seconds over the Index. Guess being a nobody doesn't grant you the same privileges as others.

[Freddie]

Thanks guys, I will check with the div. office to make sure. I am not worried about the Gartors this year, but we are making the transition from heads up racing to Stock or Super Stock. We have one car almost done that will easily fit in GT/JA, and my project stocker is coming along nicely. My 18yo son will more than likely do the driving till both cars are done, and he has not been on the track since mid last year when we lost the motor in his N/A 10.5 NMCA car.

As of last year here in D2 you could show up to tech to get your grade point, then go home.

As long as you paid your entry fee & passed, you could race or just load & leave.

-Karen


I just confirmed with the boss man....Car must be on site to purchase a tech card, car must pass tech. After that do what you please! Just make sure all safety gear is up to date, helmet etc....present with the car.

[Larry Hill]

C10 will pass

[Freddie]

Thanks again, I called the division tech director and he explained to me what we had to do to actually race, or we can simply enter, go through tech and be good. We are thinking about trying to race at least first round. We are going to make a pas with the car this weekend to see how far off the index we will be, spoke to a friend who has almost the identical car and he told me his was faster than we thought. As long as we have fun I dont really care, as the new car is coming along nice and he will run a few races with it before moving up to the Comp car....

[Mark Yacavone]

Originally Posted by winstonindy

As of last year here in D2 you could show up to tech to get your grade point, then go home.

As long as you paid your entry fee & passed, you could race or just load & leave.

-Karen


I just confirmed with the boss man....Car must be on site to purchase a tech card, car must pass tech. After that do what you please! Just make sure all safety gear is up to date, helmet etc....present with the car.

Karen , All Stockers (rental cars or not) are required to have a drive shaft loop and possibly long wheel studs to pass tech, correct?

[Tom Meyer]

Used to be in Div 5 you could tech somebody eles car as long as you did not race it. again check with you div person and make sure the guys in tech are on the same page. Why would not take some ones money for no where a tear on anything, just take the tech card and money. But then again you can't fix stupid. Tom

[Rob Petrie E395]

Originally Posted by Mark Yacavone

Karen , All Stockers (rental cars or not) are required to have a drive shaft loop and possibly long wheel studs to pass tech, correct?

Just wondering here cause I dont know for sure. But do front wheel drive cars have to have driveshaft loops. And I think as long as the stud is threaded into the nut the width of the stud (IE 1/2 inch diameter stud has to be threaded 1/2 inch into the lug nut) you would be OK. So a front wheel drive rental maybe would work if its in the guide????