shrink tubing label maker

FED 387 · 07-30-2014, 02:16 PM

multiply .64 times the width to get the ID---- look at Dymo numbers 18051--18053--18055--18057---1805443 these are WHITE--- 18052----18054----18056----18058----1805444 these are YELLOW--- figure 3 to 1 shrinkage ----these tubes are all 5 feet in length and about $25-50 per tube PRETTY expensive on the site I saw might look around see if you can find it cheaper elsewhere--- Good luck looking Regards FED 387

SST3193 · 07-31-2014, 08:10 AM

Never used the shrink tubing, just use the least expensive vinyl tape to print labels to wrap. Use it to ID cables, in an industrial maintenance job, so they can be reassembled. The least expensive 18444 labels do well with oil and will not come off, without a person removing them.

07-30-2014, 02:16 PM	#1
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,426 Likes: 550 Liked 334 Times in 181 Posts	Re: shrink tubing label maker multiply .64 times the width to get the ID---- look at Dymo numbers 18051--18053--18055--18057---1805443 these are WHITE--- 18052----18054----18056----18058----1805444 these are YELLOW--- figure 3 to 1 shrinkage ----these tubes are all 5 feet in length and about $25-50 per tube PRETTY expensive on the site I saw might look around see if you can find it cheaper elsewhere--- Good luck looking Regards FED 387

07-31-2014, 08:10 AM	#2
SST3193 Junior Member Join Date: Oct 2009 Posts: 37 Likes: 2 Liked 2 Times in 2 Posts	Re: shrink tubing label maker Never used the shrink tubing, just use the least expensive vinyl tape to print labels to wrap. Use it to ID cables, in an industrial maintenance job, so they can be reassembled. The least expensive 18444 labels do well with oil and will not come off, without a person removing them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode