Need a-arm front suspension help/suggestions after near miss

Alan Nyhus · 09-12-2014, 09:47 PM

Glad you're not hurt and the damage isn't too severe.

The factory bolts are known for working themselves loose. When redoing the front end on my Nova stocker last Winter, I used these Moog offset control arm shafts and Energy Suspension urethane bushings. They have a large diameter stud and lock nut in place of the small factory bolt.

Global West makes a great setup and Afco has greaseable steel control arm bushings.

09-12-2014, 09:47 PM	#4
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,182 Likes: 1,074 Liked 800 Times in 237 Posts	Re: Need a-arm front suspension help/suggestions after near Glad you're not hurt and the damage isn't too severe. The factory bolts are known for working themselves loose. When redoing the front end on my Nova stocker last Winter, I used these Moog offset control arm shafts and Energy Suspension urethane bushings. They have a large diameter stud and lock nut in place of the small factory bolt. Global West makes a great setup and Afco has greaseable steel control arm bushings. __________________ "That'll never work....."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode