|
|
|
|
12-02-2014, 11:31 AM
|
#1 |
|
Junior Member
Join Date: Aug 2008
Location: columbia TN
Posts: 88
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Electric fuel pressure guage
I tried the autometer electric digital water temp and oil pressure guages. They were nice and worked good at idle, but when I put RPM's up on the motor, then the display would go crazy flickering, couldn't read. Don't know if a grounding issue or what, I did not have time to trouble shoot so I took back off and put my mechanical ones back on.
|
|
|
|
12-02-2014, 12:14 PM
|
#2 |
|
VIP Member
Join Date: Mar 2002
Posts: 1,106
Likes: 57
Liked 507 Times in 116 Posts
|
Re: Electric fuel pressure guage
http://www.autometer.com/cat_gaugede...id=2824&sid=15
This the one I use.
__________________
68 Chevy11 327 F/S |
|
|
|
12-02-2014, 02:49 PM
|
#3 |
|
Member
Join Date: Sep 2006
Location: Moncton, N.B.
Posts: 276
Likes: 24
Liked 24 Times in 13 Posts
|
Re: Electric fuel pressure guage
Thanks Bob, your guage is basically the same as the one(4361) I'm looking at.
Did you mount your sending unit on the block? Terry K Last edited by terry1; 12-02-2014 at 03:04 PM. |
|
|
|
|
12-02-2014, 10:25 PM
|
#4 |
|
VIP Member
Join Date: Mar 2002
Posts: 1,106
Likes: 57
Liked 507 Times in 116 Posts
|
Re: Electric fuel pressure guage
I actually put the sending unit in the 1/8 pipe hole on the regulator. It works fine.
__________________
68 Chevy11 327 F/S |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
