283 stocker timing problems

Wade_Owens · 04-27-2015, 01:19 PM

What tooth flexplate?
Is your starter just a mini starter, or is it a gear reduction?
1 battery or 2?
12v or 16v?

Wade O

rboyle · 04-27-2015, 01:35 PM

Was the motor originally a crank hub and changed to damper? If so make sure you have the right one because there are different marks on the balancer. Had a similar problem on a street motor and used a timing tape to correct the errant marks after figured it out

04-27-2015, 01:19 PM	#1
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: 283 stocker timing problems What tooth flexplate? Is your starter just a mini starter, or is it a gear reduction? 1 battery or 2? 12v or 16v? Wade O

04-27-2015, 01:35 PM	#2
rboyle Senior Member Join Date: Jan 2015 Posts: 604 Likes: 1,457 Liked 586 Times in 162 Posts	Re: 283 stocker timing problems Was the motor originally a crank hub and changed to damper? If so make sure you have the right one because there are different marks on the balancer. Had a similar problem on a street motor and used a timing tape to correct the errant marks after figured it out

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode