|
![]() |
#6 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,016
Likes: 57
Liked 320 Times in 102 Posts
|
![]()
Pretty simple fix....
Just wire the 2 step thru a Normally Open micro switch that is located to be closed when the shifter in Low Gear.... The 2 step will only activate in low gear... If you use have to start your burn out in Low Gear just put the pressure switch in the rear brake hydraulic circuit...... Bob
__________________
Bob Mulry 7516 STK A & M Motorsports |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|