location of two step button in a stocker

D. Hake 4459 · 05-20-2015, 08:34 PM

I have an adjustable brake pressure switch plumbed into the front brake line close to the master cylinder. I have a toggle switch to energize the circuit after the burnout. I have the switch adjusted to activate about a hundred psi less than the brake pressure that I stage with. So it takes a lot of pressure to activate the two step. If you get it to come on down track you are probably sliding the tires. Just my .02

05-20-2015, 08:34 PM	#1
D. Hake 4459 Junior Member Join Date: Sep 2013 Location: Muskogee, Oklahoma Posts: 83 Likes: 56 Liked 2 Times in 1 Post	Re: location of two step button in a stocker I have an adjustable brake pressure switch plumbed into the front brake line close to the master cylinder. I have a toggle switch to energize the circuit after the burnout. I have the switch adjusted to activate about a hundred psi less than the brake pressure that I stage with. So it takes a lot of pressure to activate the two step. If you get it to come on down track you are probably sliding the tires. Just my .02 __________________ Derek Hake 4459 H/SA 69' Roadrunner

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode