Bellhousing alignment issue

Sean Marconette · 06-20-2015, 01:31 PM

On my old Lakewood bellhousings, I installed the welded style like these.

http://www.summitracing.com/parts/lak-15981

With the welded style, when the bellhousing is installed and the alignment is where you want it. With all fasteners installed and tight, then all you have to do is tack the weld bushings. Not enough heat to change the alignment.

Or as suggested buy a Browell. Best money I have ever spent.

Good Luck

Sean

06-20-2015, 01:31 PM	#5
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 796 Liked 275 Times in 76 Posts	Re: Bellhousing alignment issue On my old Lakewood bellhousings, I installed the welded style like these. http://www.summitracing.com/parts/lak-15981 With the welded style, when the bellhousing is installed and the alignment is where you want it. With all fasteners installed and tight, then all you have to do is tack the weld bushings. Not enough heat to change the alignment. Or as suggested buy a Browell. Best money I have ever spent. Good Luck Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode