|
|
|
|
06-20-2015, 02:46 PM
|
#1 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,422
Likes: 529
Liked 333 Times in 180 Posts
|
Re: Bellhousing alignment issue
John--- look at McMaster -Carr company they sell dowel pins up to 3/4" in diameter and 4 inches long pretty inexpensive too about $3-5 each plus shipping --- when you get them have any competent machinist turn them on a lathe to the diameter you need--- problem solved--- FED 387
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
