SBC Steel Crankshaft & Rods

Woodfin · 08-16-2015, 12:38 PM

Dean,

you will hear many opinions.

With my experience, a factory steel crank is completely acceptable and a good choice for your application. If it were my build I would find a virgin factory steel crank and have it prepped by an experienced machinist.

For rods, my choice would be Manley [chosen per the Manley catalog specs] or Callies Comp Star line. Either is completely acceptable for your usage.

08-16-2015, 12:38 PM	#2
Woodfin Senior Member Join Date: Sep 2006 Location: Kilgore TX Posts: 534 Likes: 8 Liked 267 Times in 104 Posts	Re: SBC Steel Crankshaft & Rods Dean, you will hear many opinions. With my experience, a factory steel crank is completely acceptable and a good choice for your application. If it were my build I would find a virgin factory steel crank and have it prepped by an experienced machinist. For rods, my choice would be Manley [chosen per the Manley catalog specs] or Callies Comp Star line. Either is completely acceptable for your usage.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode