bracket to stocker

[jmoneyfoot]

I want to run the chevy 305. What block casting? What heads what carb?

[Mark Yacavone]

Originally Posted by jmoneyfoot

I want to run the chevy 305. What block casting? What heads what carb?

What horsepower? what carb?

[jmoneyfoot]

that's what I'm trying to figure out.I have a 1977 buick skylark race car with no motor no transmission that I want to stock eliminator race.I need to find out what came in the car and what components I can and can't use

[Mark Yacavone]

Originally Posted by jmoneyfoot

that's what I'm trying to figure out.I have a 1977 buick skylark race car with no motor no transmission that I want to stock eliminator race.I need to find out what came in the car and what components I can and can't use

I gave you the link already.

[rtaylor3410]

Looks like the 305 is nhra rated at 180hp and would be a natural R/SA

P. Disp. C.R. Ind. Make Model/Transmission Manifold R.R. Lifter Head cc Notes
105 231 9.25 1-2 Roch 17057145,447/SM 1254143 1.53 H 42.70 1,4 Odd Fire
105 231 9.25 1-2 Roch 17057145,447/SM 1257119 1.53 H 42.70 1,7 Even Fire
135 301 9.52 1-2 Roch 7057173,7057172 526213 1.50 H 69.90 3
140 350 9.61 1-2 Roch 7056140,7056143 1249167 1.55 H 50.00 4
145 305 9.24 1-2 Roch 17057107,17057111 346260 1.50 H 59.10 8
155 350 9.61 1-4 Roch 17056246,17056546 1249169 1.55 H 50.00 5
170 350 9.06 1-4 Roch 17057250,3,5,6,8,550,3 411990 1.60 H 66.35 5
170 350 10.21 1-4 Roch 17057202,502 346249 1.50 H 63.35 6
185 403 9.18 1-4 Roch 17057250,2,3,5,6,7,8,550 411990 1.60 H 71.69 5

1 Alt carb - 17057143,148,448/Auto
3 Carb sizes - 1375/1218
4 Carb sizes - 1686/1250
5 Carb sizes - 1375x2250/1218xAV
6 Carb sizes - 1375x2250/1093xAV
7 Carb sizes – 1437/1093
8 Carb sizes – 1686/1186

[Billy Nees]

The 305 2V at 180 is a pretty good deal. It's a natural R car that can make T.
I would however think about calling it a 76 and using either one of the 350 Buick motors. The 2V is at 205 and the 4V is at 230.

[Mark Yacavone]

Originally Posted by rtaylor3410

Looks like the 305 is nhra rated at 180hp and would be a natural R/SA

P. Disp. C.R. Ind. Make Model/Transmission Manifold R.R. Lifter Head cc Notes
105 231 9.25 1-2 Roch 17057145,447/SM 1254143 1.53 H 42.70 1,4 Odd Fire
105 231 9.25 1-2 Roch 17057145,447/SM 1257119 1.53 H 42.70 1,7 Even Fire
135 301 9.52 1-2 Roch 7057173,7057172 526213 1.50 H 69.90 3
140 350 9.61 1-2 Roch 7056140,7056143 1249167 1.55 H 50.00 4
145 305 9.24 1-2 Roch 17057107,17057111 346260 1.50 H 59.10 8
155 350 9.61 1-4 Roch 17056246,17056546 1249169 1.55 H 50.00 5
170 350 9.06 1-4 Roch 17057250,3,5,6,8,550,3 411990 1.60 H 66.35 5
170 350 10.21 1-4 Roch 17057202,502 346249 1.50 H 63.35 6
185 403 9.18 1-4 Roch 17057250,2,3,5,6,7,8,550 411990 1.60 H 71.69 5

1 Alt carb - 17057143,148,448/Auto
3 Carb sizes - 1375/1218
4 Carb sizes - 1686/1250
5 Carb sizes - 1375x2250/1218xAV
6 Carb sizes - 1375x2250/1093xAV
7 Carb sizes – 1437/1093
8 Carb sizes – 1686/1186

Bro, You are showing the OP some engines that weren't available in the Skylark.
He's gonna be even more confused.
No 350 4V Chevy till 79. Too high (287) for an entry level deal ..in my opinion.

[jmoneyfoot]

Ok thanks for the link. 145hp 305 2bbl

[jmoneyfoot]

can I use any 305 block?

[impstocker]

I understand wanting to build your own car, I am in the process of finishing my 1965 BBC Impala (it is on the Race car build section of forum)

One thing I did was go to NHRA Points Meet, National Event, Stock/Super Stock combo races and just look at other cars and talk to people. I crawled around a bunch of cars.

Not too sure where you live but IHRA has a Stock/GT class where you can run that BBC if it was built into a Stock Eliminator motor, keep tranny and rear end too.

Good Luck and post into the Race car build section.

Will Lamprecht 65 Impala I/SA 396/325