Cam Info

Leon Rennebaum · 11-29-2016, 12:11 PM

Since no one else has replied I can only offer information from CD Catalog Vol. V from 1980: The only grind that comes close is Part No. 20871, Grind No. S-290 300-06 which is 290/300 degrees duration at ramp, 255/265 degrees duration @ .050", .540/.562 lift, .026 lash int/exh. It would appear that the grind no. is simply the intake ramp duration, exhaust ramp duration, intake centerline (in this case 106 degrees). This grind is listed as a competition solid lifter cam. Not sure what the 263 is! Hope this helps!

11-29-2016, 12:11 PM	#2
Leon Rennebaum Junior Member Join Date: Oct 2008 Location: Williamstown, NJ Posts: 30 Likes: 2 Liked 0 Times in 0 Posts	Re: Cam Info Since no one else has replied I can only offer information from CD Catalog Vol. V from 1980: The only grind that comes close is Part No. 20871, Grind No. S-290 300-06 which is 290/300 degrees duration at ramp, 255/265 degrees duration @ .050", .540/.562 lift, .026 lash int/exh. It would appear that the grind no. is simply the intake ramp duration, exhaust ramp duration, intake centerline (in this case 106 degrees). This grind is listed as a competition solid lifter cam. Not sure what the 263 is! Hope this helps!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode