What Works and What Doesn't - Page 2

Eman · 01-16-2017, 01:13 PM

I have purchased every aluminum polish available. I've gone to the Mid America truck show and ck'd out every brand of polish. Mothers has to be the worst of the bunch, too much work not enough results!
The purple California polish works good. White Diamond that is available at places like Advance AP is good. There's one called the lazy man's wheel polish that works well and they also have a mild acidic cleaner that removes oxidation before you polish. Also another one that works well is Smith's and it comes in different grades of coarseness.

HR9121 · 01-16-2017, 10:48 PM

Ok I will stick my 2 pennies in also, Flitz is my metal polish of choice. Hatteras yahts' factory is located here where I live and alot of the guys I know that work on them swear by it. They also make a polish for plastics and fiberglass that works very well. I have used the Zephyr also and was very pleased with it as well. Now if I could just find the time to use them, everyone is not retired you know Mr Larry!

Larry Hill · 01-17-2017, 02:36 PM

What works:

Walmart carb. cleaner, Walmart break parts cleaner, less than $2.50 for a 14.5 Oz. can. Jeff Taylor Performance cylinder wall preparation, calling it a hone job just doesn't give the process full recognition.

Pro Trans, Joel's on Joy, and Arnett Transmission.

vic guilmino · 01-17-2017, 04:18 PM

how about wax for motorhomes and trailers

Eman · 01-17-2017, 08:50 PM

http://bluemagicusa.com/index.php/bl...ish_cream_jar/
Here's another product that works great. This non abrasive polish works good on aluminum but also works on plastic like lexan windshields. Same company makes other plastic polish also and I have been able to get overspray off of plastic with it.

Mark Yacavone · 01-17-2017, 10:06 PM

Quote:

Originally Posted by vic guilmino

how about wax for motorhomes and trailers

Vic, I've been using Turtle Zipwax wash and wax for quite now. You have to scrub it with a long handled brush, but eventually it gives a bit of shine to the vehicle.
It's not Blue Corral, but hand waxing an RV or an enclosed trailer just ain't my thing.

bigsixman · 01-17-2017, 10:10 PM

Quote:

Originally Posted by HR9121

Ok I will stick my 2 pennies in also, Flitz is my metal polish of choice. Hatteras yahts' factory is located here where I live and alot of the guys I know that work on them swear by it. They also make a polish for plastics and fiberglass that works very well. I have used the Zephyr also and was very pleased with it as well. Now if I could just find the time to use them, everyone is not retired you know Mr Larry!

Flitz is my favorite polish too. I bought my first can of it out at the Sturgis motorcycle rally back in 2010.

jim hensley · 01-19-2017, 01:23 AM

If there is one that don't leave all that messy black residue I would be all for it. I spend more time waxing away the black residue off my trailer trim than I do cleaning it with aluminum cleaner. wax seems to take the black residue off better than anything.

SS3718 · 02-19-2017, 04:10 PM

I tried the purple metal polish! I have a brand new bottle, minus the little bit that I used, that I will ship to anyone that wants to pay the shipping! It didn't save me much work after I had to redo with Mother's Billet Polish!

Thanks,
Nick

Jeff Niceswanger · 02-19-2017, 05:32 PM

You don't like it Nick .. Man I really do .. But I always use the drill motor with a buffer wheel ( one of mothers) on it ... Are you doing it by hand ? ... I guess I'll go buy a bottle of Billet ....

01-16-2017, 01:13 PM	#11
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Re: What Works and What Doesn't I have purchased every aluminum polish available. I've gone to the Mid America truck show and ck'd out every brand of polish. Mothers has to be the worst of the bunch, too much work not enough results! The purple California polish works good. White Diamond that is available at places like Advance AP is good. There's one called the lazy man's wheel polish that works well and they also have a mild acidic cleaner that removes oxidation before you polish. Also another one that works well is Smith's and it comes in different grades of coarseness.

01-16-2017, 10:48 PM	#12
HR9121 Live Reporter Join Date: Jan 2011 Location: New Bern, NC Posts: 3,467 Likes: 146 Liked 3,363 Times in 731 Posts	Re: What Works and What Doesn't Ok I will stick my 2 pennies in also, Flitz is my metal polish of choice. Hatteras yahts' factory is located here where I live and alot of the guys I know that work on them swear by it. They also make a polish for plastics and fiberglass that works very well. I have used the Zephyr also and was very pleased with it as well. Now if I could just find the time to use them, everyone is not retired you know Mr Larry! __________________ James Williamson W200 J/SA. SS/JA

01-17-2017, 02:36 PM	#13
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: What Works and What Doesn't What works: Walmart carb. cleaner, Walmart break parts cleaner, less than $2.50 for a 14.5 Oz. can. Jeff Taylor Performance cylinder wall preparation, calling it a hone job just doesn't give the process full recognition. Pro Trans, Joel's on Joy, and Arnett Transmission. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-17-2017, 04:18 PM	#14
vic guilmino Senior Member Join Date: Dec 2001 Location: wv Posts: 884 Likes: 42 Liked 56 Times in 21 Posts	Re: What Works and What Doesn't how about wax for motorhomes and trailers __________________ Vic Guilmino 1129 STK

01-17-2017, 08:50 PM	#15
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Re: What Works and What Doesn't http://bluemagicusa.com/index.php/bl...ish_cream_jar/ Here's another product that works great. This non abrasive polish works good on aluminum but also works on plastic like lexan windshields. Same company makes other plastic polish also and I have been able to get overspray off of plastic with it.

01-19-2017, 01:23 AM	#18
jim hensley Junior Member Join Date: Mar 2012 Location: columbia tn Posts: 50 Likes: 0 Liked 0 Times in 0 Posts	Re: What Works and What Doesn't If there is one that don't leave all that messy black residue I would be all for it. I spend more time waxing away the black residue off my trailer trim than I do cleaning it with aluminum cleaner. wax seems to take the black residue off better than anything.

02-19-2017, 04:10 PM	#19
SS3718 Member Join Date: Sep 2006 Posts: 129 Likes: 5 Liked 27 Times in 14 Posts	Re: What Works and What Doesn't I tried the purple metal polish! I have a brand new bottle, minus the little bit that I used, that I will ship to anyone that wants to pay the shipping! It didn't save me much work after I had to redo with Mother's Billet Polish! Thanks, Nick

02-19-2017, 05:32 PM	#20
Jeff Niceswanger Senior Member Join Date: Jul 2003 Posts: 894 Likes: 684 Liked 1,031 Times in 368 Posts	Re: What Works and What Doesn't You don't like it Nick .. Man I really do .. But I always use the drill motor with a buffer wheel ( one of mothers) on it ... Are you doing it by hand ? ... I guess I'll go buy a bottle of Billet .... __________________ Jeff Niceswanger 3740 SS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode