Racepak Cutch sensor

John Duzac · 03-08-2017, 07:28 PM

Quote:

Originally Posted by MOTORSPORTS Innovations

The folks at G-force trans do a nifty procedure installing a Cummins gear tooth sensor into the trans case to eliminate the need of the sensor / magnet in the bell housing - I install the Racepak plug and you are good to go. Pretty cool.

How neat is this?
Note to G-Force: drill the hole in every transmission you sell and cap off. That way when the owner of the transmission realizes he/she needs a data system, the cap can be removed and sensor easily installed. Automaticly figuer it into the price of the transmission. Can it get any easier?

Jim Caughlin · 03-08-2017, 07:59 PM

I just threw another sensor with a broken wire away earlier this year. As though fighting a manual trans back in position isn't fun, nothing makes it more enjoyable than trying to fish the sensor cable through the bellhousing at the same time...

Jim Caughlin
SS 6019

03-08-2017, 07:59 PM	#2
Jim Caughlin Senior Member Join Date: Mar 2002 Location: Woodburn, Or Posts: 685 Likes: 82 Liked 805 Times in 245 Posts	Re: Racepak Cutch sensor I just threw another sensor with a broken wire away earlier this year. As though fighting a manual trans back in position isn't fun, nothing makes it more enjoyable than trying to fish the sensor cable through the bellhousing at the same time... Jim Caughlin SS 6019

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode