|
|
06-18-2017, 11:27 PM
|
#9 |
|
Member
Join Date: Feb 2007
Location: NORTHEAST
Posts: 287
Likes: 1
Liked 18 Times in 10 Posts
|
Re: cometic head gaskets
If the block was plate honed its best to go with what was used for hardware and torque during the plate honing procedure if it was plate honed to achieve good ring seal.
Studs do to the fine thread seem to distort cylinders more then bolts from what I have seen. |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode